A proxy is a machine or software that does something on behalf of you, the client.
You can also see it as a middle man that sits between you and the server you want to work with, a middle man that you connect to instead of the actual remote server. You ask the proxy to perform your desired operation for you and then it will run off and do that and then return back the data to you.
There are several different types of proxies and we shall list and discuss them further down in this section.
Discover your proxy
Some networks are setup to require a proxy in order for you to reach the Internet or perhaps that special network you are interested in. The use of proxies are introduced on your network by the people and management that run your network for policy or technical reasons.
In the networking space there are a few methods for the automatic detection of proxies and how to connect to them, but none of those methods are truly universal and curl supports none of them. Furthermore, when you communicate to the outside world through a proxy that often means that you have to put a lot of trust on the proxy as it will be able to see and modify all the non-secure network traffic you send or get through it. That trust is not easy to assume automatically.
If you check your browser's network settings, sometimes under an advanced settings tab, you can learn what proxy or proxies your browser is configured to use. Chances are very big that you should use the same one or ones when you use curl.
TBD: screenshots of how to find proxy settings in Firefox and Chrome?
Some network environments provides several different proxies that should be used in different situations, and a very customizable way to handle that is supported by the browsers. This is called "proxy auto-config", or PAC.
(these aren't proxies but in the way)
curl supports several different types of proxies.
The default proxy type is HTTP so if you specify a proxy host name (or IP address) without a scheme part (the part that is often written as "http://") curl goes with assuming it's an HTTP proxy.
curl also allows a number of different options to set the proxy type instead of using the scheme prefix. See the SOCKS section below.
An HTTP proxy is a proxy that the client speaks HTTP with to get the transfer
done. curl will, by default, assume that a host you point out with
--proxy is an HTTP proxy, and unless you also specify a port number it will
default to port 3128 (and the reason for that particular port number is purely
If you want to request the example.com web page using a proxy on 192.168.0.1 port 8080, a command line could look like:
curl -x 192.168.0.1:8080 http:/example.com/
Recall that the proxy receives your request, forwards it to the real server, then reads the response from the server and then hands that back to the client.
If you enable verbose mode with
-v when talking to a proxy, you will see
that curl connects to the proxy instead of the remote server, and you will see
that it uses a slightly different request line.
HTTPS and proxy
HTTPS was designed to allow and provide secure and safe end-to-end privacy
from the client to the server (and back). In order to provide that when
speaking to an HTTP proxy, the HTTP protocol has a special request that curl
uses to setup a tunnel through the proxy that it then can encrypt and
verify. This HTTP method is known as
When the proxy tunnels encrypted data through to the remote server after a CONNECT method sets it up, the proxy cannot see nor modify the traffic without breaking the encryption:
curl -x proxy.example.com:80 https://example.com/
MITM means Man-In-The-Middle. MITM-proxies are usually deployed by companies in "enterprise environments" and elsewhere, where the owners of the network have a desire to investigate even TLS encrypted traffic.
To do this, they require users to install a custom "trust root" (CA cert) in the client, and then the proxy terminates all TLS traffic from the client, impersonates the remote server and acts like a proxy. The proxy then sends back a generated certificate signed by the custom CA. Such proxy setups usually transparently capture all traffic from clients to TCP port 443 on a remote machine. Running curl in such a network would also get its HTTPS traffic captured.
This practice, of course, allows the middle man to decrypt and snoop on all TLS traffic.
Non-HTTP protocols over an HTTP proxy
An "HTTP proxy" means the proxy itself speaks HTTP. HTTP proxies are primarily used to proxy HTTP but it is also fairly common that they support other protocols as well. In particular, FTP is fairly commonly supported.
When talking FTP "over" an HTTP proxy, it is usually done by more or less pretending the other protocol works like HTTP and asking the proxy to "get this URL" even if the URL isn't using HTTP. This distinction is important because it means that when sent over an HTTP proxy like this, curl doesn't really speak FTP even though given an FTP URL; thus FTP-specific features will not work:
curl -x http://proxy.example.com:80 ftp://ftp.example.com/file.txt
What you can do instead then, is to "tunnel through" the HTTP proxy!
HTTP proxy tunneling
Most HTTP proxies allow clients to "tunnel through" it to a server on the other side. That's exactly what's done every time you use HTTPS through the HTTP proxy.
You tunnel through an HTTP proxy with curl using
When you do HTTPS through a proxy you normally connect through to the default HTTPS remote TCP port number 443, so therefore you will find that most HTTP proxies white list and allow connections only to hosts on that port number and perhaps a few others. Most proxies will deny clients from connecting to just any random port (for reasons only the proxy administrators know).
Still, assuming that the HTTP proxy allows it, you can ask it to tunnel through to a remote server on any port number so you can do other protocols "normally" even when tunneling. You can do FTP tunneling like this:
curl -p -x http://proxy.example.com:80 ftp://ftp.example.com/file.txt
You can tell curl to use HTTP/1.0 in its CONNECT request issued to the HTTP
proxy by using
--proxy1.0 [proxy] instead of
SOCKS is a protocol used for proxies and curl supports it. curl supports both SOCKS version 4 as well as version 5, and both versions come in two flavors.
You can select the specific SOCKS version to use by using the correct scheme
part for the given proxy host with
-x, or you can specify it with a separate
option instead of
SOCKS4 is for the version 4 and SOCKS4a is for the version 4 without resolving the host name locally:
curl -x socks4://proxy.example.com http://www.example.com/ curl --socks4 proxy.example.com http://www.example.com/
The SOCKS4a versions:
curl -x socks4a://proxy.example.com http://www.example.com/ curl --socks4a proxy.example.com http://www.example.com/
SOCKS5 is for the version 5 and SOCKS5-hostname is for the version 5 without resolving the host name locally:
curl -x socks5://proxy.example.com http://www.example.com/ curl --socks5 proxy.example.com http://www.example.com/
The SOCKS5-hostname versions. This sends the host name to the server so there's no name resolving done locally:
curl -x socks5h://proxy.example.com http://www.example.com/ curl --socks5-hostname proxy.example.com http://www.example.com/
HTTP proxies can require authentication, so curl then needs to provide the proper credentials to the proxy to be allowed to use it, and failing to do will only make the proxy return back HTTP responses using code 407.
Authentication for proxies is very similar to "normal" HTTP authentication, but is separate from the server authentication to allow clients to independently use both normal host authentication as well as proxy authentication.
With curl, you set the user name and password for the proxy authentication
-U user:password or
--proxy-user user:password option:
curl -U daniel:secr3t -x myproxy:80 http://example.com
This example will default to using the Basic authentication scheme. Some
proxies will require another authentication scheme (and the headers that are
returned when you get a 407 response will tell you which) and then you can ask
for a specific method with
--proxy-ntlm. The above example command again, but asking for NTLM auth with
curl -U daniel:secr3t -x myproxy:80 http://example.com --proxy-ntlm
There's also the option that asks curl to figure out which method the proxy
wants and supports and then go with that (with the possible expense of extra
--proxy-anyauth. Asking curl to use any method the proxy
wants is then like this:
curl -U daniel:secr3t -x myproxy:80 http://example.com --proxy-anyauth
HTTPS to proxy
All the previously mentioned protocols to speak with the proxy are clear text protocols, HTTP and the SOCKS versions. Using these methods could allow someone to eavesdrop on your traffic the local network where you or the proxy reside.
One solution for that is to use HTTPS to the proxy, which then establishes a secure and encrypted connection that is safe from easy surveillance.
curl does not currently support HTTPS to the proxy, but there is work in progress for this that we hope to land in a future curl version.
Proxy environment variables
curl checks for the existence of specially-named environment variables before it runs to see if a proxy is requested to get used.
You specify the proxy by setting a variable named
[scheme]_proxy to hold the
proxy host name (the same way you would specify the host with
-x). So if you
want to tell curl to use a proxy when access a HTTP server, you set the
'http_proxy' environment variable. Like this:
http_proxy=http://proxy.example.com:80 curl -v www.example.com
While the above example shows HTTP, you can, of course, also set ftp_proxy, https_proxy, and so on. All these proxy environment variable names except http_proxy can also be specified in uppercase, like HTTPS_PROXY.
To set a single variable that controls all protocols, the ALL_PROXY exists. If a specific protocol variable one exists, such a one will take precedence.
When using environment variables to set a proxy, you could easily end up in a situation where one or a few host names should be excluded from going through the proxy. This is then done with the NO_PROXY variable. Set that to a comma- separated list of host names that should not use a proxy when being accessed. You can set NO_PROXY to be a single asterisk ('*') to match all hosts.
As an alternative to the NO_PROXY variable, there's also a
line option that serves the same purpose and works the same way.